Tilbake

Installing printers in Windows

How to install printers in Windows 10.

Norsk versjon - Installere NTNU-skriver i Windows

Topic page about Printing and Copying | Pages tagged print

 Watch instructional video on printer setup for Windows

Requirements #

  • You have to be connected to NTNUs network to print, either via VPN, Eduroam, NTNU MA or a network cable.
  • You have to have enough available funds in your printing allowance account.
  • Some computer labs are configured to not allow installation of new printers, and you therefore have to use the pre-installed printer(s).

How to connect to a printer #

The printers at computer labs are typically connected to a combined print queue for several printers. This means that when you are sending a printing job to the printer, and then sweep your card at a one of the computer lab printers connected to that queue, you will be able to access your printing job there. 

All NTNU printers with card readers are available on:

  • ntnuprint-ricoh
  • ntnuprint-xerox

Note: These queues are interchangeable, meaning that it does not matter which one you use for normal printing, but some special features (colour, duplex, stapling etc.) may require that you use the queue that match with the printer you use (ntnuprint-ricoh for Ricoh printers, ntnuprint-xerox for Xerox printers).

Installation #

The following procedure is usually only necessary once.

  • Connect to NTNUs wireless (eduroam, not ntnuguest) or cabled network.
  • Open the Start menu and type "Run" (older versions have Run directly on the Start-menu)
    • In Windows 8 and 10, press the Windows key, then type "Run", followed by Enter.
  • Write down the address to the print server, "\\followprint.win.ntnu.no".
  • Press Enter

  • After a little while, a window similar to the one below may pop up. Here you type win-ntnu-no\yourusername and your password underneath. With newer versions of Windows you might have to click More choices, then Use a different account to change the username field.
  • Important: Check Remember my credentials. That way you will not have to add the printer again the next time. If you forget, you will have to delete the printer first and then add it again.

  • Click OK to proceed.
  • After you have successfully logged in, a new window will appear. In this window you can double-click on the printer queues you wish to install. The following queues are used for regular printing:
    • ntnuprint-ricoh
    • ntnuprint-xerox
  • After the installation is complete, a small window will open in the top left corner of the screen. You can close this window. You can also close the window that shows available printer queues. You are now set to print with your own computer!

Printing in colour #

All the printers on Followprint are configured to force black-and-white printing to reduce the printing cost for students, but this can be disabled by following these steps:

Xerox #

  • Select Print, then Preferences
  • From the tab Image Options, remove the checkbox next to "Xerox black-and-white conversion"

Ricoh #

  • Select Print, then Preferences
  • From the drop-down menu at the bottom, select "Color"

 Troubleshooting #

  • Check that you are connected to internet.
  • Run Windows Update and install all available Windows updates.
  • Make sure you have enough money remaining in your printing allowance.

Contact #

Orakel Support Services can help if you encounter difficulties.

15 Vedlegg
63512 Visninger
Gjennomsnitt (4 Stemmer)