Connect to eduroam with Windows
How to connect to Eduroam for students and employees.
Norsk versjon - Koble til trådløsnettet med Windows
Automatic setup #
Here you can connect to eduroam automatically. This works for Windows 10, Windows 8, Windows 7, Windows XP, Ubuntu Linux, Mac OS X 10.5/6 og iOS. If this doesn't work, please try with the methods described below.
Manual setup with Windows 10 #
- Left-click the wireless icon and left-click 'Eduroam'
- Make sure 'connect automatically' is checked.
- Fill in email@example.com
- Fill in NTNU-password
- Click OK
Manual setup with Windows Vista/7/8 #
The methods for connecting to eduroam are similar for Windows Vista, Windows 7 and Windows 8. They differ graphically (not a lot), but all the settings are the same.
If you have tried to connect to eduroam by simply clicking the network, and entering your ntnu-username and password, try the following two steps.
Removing the network details
- Left click the wireless icon.
- Right click eduroam.
- If a menu appears, choose Forget this network.
- If a menu doesn't appear, go to the next step.
Connect to eduroam manually
- Right click the wireless-icon and choose Open Network and sharing center.
- Choose Set up a new connection or network.
- Choose Manually connect to a wireless network.
- Click Next.
- Fill inn the information shown in the picture below.
- Network name: eduroam
- Security Type: WPA2-Enterprise
- Encryption type: AES
- If your network card doesn't support WPA2 with AES, you should choose Security Type: WPA-ENTERPRISE with Encryption type: TKIP.
- Click Next.
- Click Ok or Change connection properties.
- If you clicked Change connection properties, go to step 6.
- If you clicked Ok, do the following:
- 1. Left click the wireless icon.
- 2. Right click eduroam and choose View connection properties.
- Choose the Security-tab.
- Check that it says Security type: WPA2-Enterprise
- Encryption type: AES
- Network authentication method: Microsoft: Protected EAP (PEAP)
- Choose Settings.
- If you have gone through this guide previously, and it didn't work, change Security type and Encryption type to WPA-Enterprise and TKIP.
- Click advanced, and make sure it looks like the picture below
- Click Validate server certificate
- Select "DigiCert Assured ID Root CA"
- If you have gone through this guide previously, and it didn't work, you can click Connect to these servers and write "radius.ntnu.no"
- Next to Select Authentication Method, click Configure
- Turn off automatically using Windows username and password.
- Click Ok to save and close this windows.
- Click Ok again to save and close the Protected EAP properties window. You should now see the window in step 7.
- The window below should appear. Click Advanced settings.
- Check for Specify authentication mode:
- Choose User authentication.
- Click Save credentials.
- For username, write: your ntnu-username followed by @ntnu.no (replace "brukernavn" with your username in the picture below)
- In the password field, write the password. This is the same password as the one you normally use with your username on our services (such as Innsida).
- Click Ok and click Ok again in Advanced settings.
- If you have gone through this guide previously, and it didn't work, try computer and user authentication in Advanced settings.
- Click Ok one last time in the window called eduroam Wireless Network Properties.
Your eduroam connection should now be set up correctly. For some Windows 8 users, it still won't work. Trying one of the alternative properties mentioned in this guide can then help. Repeating this guide (up to 10) times has also proved to work from time to time.
Problems with connecting #
If you experience any issues with the wireless network, check the following:
- Is the wireless network card turned on? Many laptops will have a button for this.
- Double check Step 8 and try the radius.ntnu.no solution.
- Double check that you wrote the correct username and password. If you don't remember your username or password, you can contact the Orakel Support Services.
- Try to delete the wireless profile before attempting to set up the connection one more time. You delete the profile by
- Open Command Line Window by clicking the Windows-key and typing "cmd"
- Type in netsh wlan delete profile name="eduroam"
- Click Enter
See also #
Orakel Support Services can help if you have questions or if you encounter difficulties.